@Air Compressor
2025-04-22

Why do pharmaceutical companies and medical device companies at least have air compressors ready for use?

Pharmaceutical companies and medical device companies require air compressors to be used at least once, mainly for the following reasons:

  1. Ensure continuity of production
    • In the production of pharmaceuticals and medical devices, compressed air is often an indispensable power source, used to drive pneumatic tools, automation equipment, and cleaning systems. If the air compressor fails, causing the supply of compressed air to be interrupted, the production line may be forced to shut down, seriously affecting production progress and efficiency. Through the configuration of one for standby and one for use, it can be ensured that when one air compressor fails, another can quickly take over, thereby maintaining the continuity of production.
  2. Avoid product quality issues
    • The pharmaceutical and medical device industries have strict requirements for product quality. The quality of compressed air directly affects the cleanliness of the production process and the final quality of the product. If the air compressor fails and causes insufficient supply of compressed air or quality degradation, it may have an adverse impact on product quality and even lead to product failure. The one-stop configuration reduces this risk and ensures a stable supply and high quality of compressed air.
  3. compliance with regulatory requirements
    • The pharmaceutical and medical device industries are subject to strict regulations such as GMP (Good Manufacturing Practices). These regulations have clear requirements for the stability of the production environment, equipment reliability and product safety. Through the one-stop configuration, companies can better meet regulatory requirements and ensure production process compliance and product safety.
  4. deal with emergencies
    • In the actual production process, various emergencies may be encountered, such as power failures, equipment failures, etc. The one-stop configuration can provide companies with additional protection to ensure that a stable supply of compressed air can be maintained in the event of emergencies, thereby avoiding more serious consequences.
Welcome!

Related Articles:
@Air Compressor
2025-04-18

How much nitrogen concentration can blow the wafer?

During semiconductor manufacturing, nitrogen is used to blow wafers mainly to clean the wafer surface, remove moisture, impurities and possible pollutants, and prevent wafer oxidation. In general, in order to ensure the cleanliness of the wafer surface and prevent oxidation, it is recommended that…

@Air Compressor
2025-04-25

What is the mpa of compressed air for general industrial use

The pressure of compressed air for general industrial use is usually between 0.6MPa and 0.8MPa (that is, 6 kilograms of force to 8 kilograms of force per square centimeter). This pressure range can meet the needs of most industrial applications, but the specific pressure value will vary according to…

@Air Compressor
2025-06-10

Oil content standard for compressed air for semiconductor applications

Semiconductor manufacturing is a benchmark for precision manufacturing, and its production environment requires the extreme cleanliness of compressed air. The following is a systematic explanation of the requirements for controlling the oil content of compressed air in the semiconductor industry from three dimensions: industry standards, process adaptability, and quality control system…

@Air Compressor
2025-03-31

What is the normal range of factory pneumatic equipment pressure

The pressure of pneumatic equipment in the factory needs to be flexibly adjusted according to the equipment type and application scenario. It is usually controlled at 0.5-0.8 MPa to cover most needs, but it needs to be accurately controlled through pressure reducing valves and pressure gauges.

@Air Compressor
2025-05-28

Can air compressor be used for aeration and agitation?

Explanation on the application of air compressor in aeration and agitation As a universal air source equipment, air compressor has widespread application feasibility in aeration and agitation processes. After technical analysis and industry practice verification, we now discuss its applicability, system configuration and operation management…