Air Compressor
Loading content
Skip to main content

Air Compressor Model Nameplate

What is an air compressor nameplate?

The air compressor nameplate is an identification component affixed to the side of the casing, used to centrally display the equipment’s identity information and key technical specifications. As a statutory certificate accompanying the unit upon shipment, the nameplate not only facilitates warehousing and logistics management but also serves as the fundamental basis for on-site commissioning, compliance inspections, and after-sales maintenance. Accurately reading the nameplate data can effectively prevent performance degradation or safety hazards caused by mismatched operating conditions.

Interpretation of Core Parameters on the Nameplate

Although layouts vary across models with different architectures, key data typically includes the following items:

  • Discharge pressure: The maximum allowable outlet pressure for continuous equipment operation, commonly expressed in megapascals (MPa) or Ba (bar), directly related to the pressure rating of the downstream piping and pneumatic components.
  • Displacement / Volumetric Flow Rate: The volume of gas at standard conditions conveyed per unit time, expressed in cubic meters per minute (m³/min) or liters per second (L/s) Measurement, reflecting the actual scale of energy supply.
  • Rated power: The rated power of the electric motor driving the host machine, indicated in kilowatts (kW), used to calculate distribution capacity and baseline energy consumption levels.
  • Power Supply Specifications: Clearly specify the applicable voltage level and frequency; for example, parameters for three-phase AC power. Incorrect connection may cause insulation breakdown or trigger protective devices.
  • Overall machine weight and exterior dimensionsProvided guidance on anchor bolt layout, selection of lifting points, and design of factory aisle clearances.
  • Serial Number and Production DateRecord manufacturing batch information to support warranty period determination and spare parts compatibility inquiries.

How to correctly identify and verify information?

Before equipment is installed or systems are retrofitted, nameplate data should be cross‑checked against process requirements. If the air‑use side experiences intermittent high‑load cycling, particular attention must be paid to verifying the instantaneous flow margin. When ambient temperature and humidity fluctuate significantly, the nameplate‑specified operating temperature range should be considered to assess whether the cooling system and lubricant selection are appropriate. Additionally, verify that the nameplate is securely riveted or adhered to prevent information loss due to prolonged, high‑frequency vibration.

Nameplate Maintenance and Daily Precautions

Oil stains, dust accumulation, or condensation damage commonly found in industrial environments can accelerate the aging of nameplates. During routine inspections, gently wipe the surface with a dry, soft cloth; for stubborn dirt, apply a small amount of mild detergent. Never use organic solvents or hard tools to scrape the surface. If accidental damage renders key markings illegible, promptly request replacement parts from the manufacturer through official channels. Do not alter or obscure the markings yourself, as this could interfere with scheduled safety inspections and asset depreciation calculations.

Share to

share

There are no comments yet. Be the first to comment!

Post a new comment

Comment content will be automatically filtered for XSS security vulnerabilities.
Basic HTML tags are available, including: bold, italic, code, quotes, links, etc.