At the equipment end, the air compressor’s discharge pressure typically refers to the exhaust pressure; however, the actual downstream operating pressure does not necessarily equal the exhaust pressure. The exhaust pressure is a measure at the compressor outlet,…
Compressed air system
Blog post
Is it correct to install the refrigerant dryer after the air compressor and before the air receiver tank?
This article examines the proper installation sequence of refrigerant dryers, air compressors, and air receivers. It provides a detailed analysis of the drawbacks of positioning the refrigerant dryer upstream of the air receiver, elucidating how placing the receiver…
The pressure setting of a compressed air storage tank directly affects the safety and efficiency of the system. This article provides a detailed analysis of the typical operating pressure range, design pressure standards, and key considerations for pressure…
Blog post
The working pressure of the compressed air pipeline is 0.8 MPa; analysis of the design pressure and the valve’s pressure rating.
This paper focuses on an air‑compressor pipeline operating at a working pressure of 0.8 MPa and provides a detailed analysis of the principles for determining its design pressure and the pressure rating of its valves. Generally, the design…
This article provides a detailed overview of spare parts management and maintenance best practices for water-lubricated air compressors in the Yichang region. It covers core component selection, routine inspections, replacement intervals, and preventive maintenance techniques, helping enterprises extend…
The construction of a high‑efficiency compressed air room is a critical component for enhancing industrial productivity and reducing energy consumption. This paper provides a detailed analysis of the key considerations in site selection and planning, equipment selection, piping…
Vibration control of the air compressor discharge piping is critical to the safe and stable operation of the equipment. This paper provides a detailed analysis of the relevant standards, measurement and evaluation methods, and common vibration‑mitigation measures for…
In industrial production, the parallel operation of multiple air compressors is a common configuration. To prevent high-pressure gas from backflowing into shut-down units—thus avoiding severe failures such as compressor reversal, motor damage, and lubricant leakage—it is essential to…
Latest comments