Oil-free screw air compressors do not have a fixed “pressure loss rate” specification. In practical engineering, pressure loss refers to the total pressure drop across the entire compressed-air system, from the compressor’s outlet to the point of air…
Piping design
Blog post
How should an air compressor be connected to a dryer? Typical piping sequence and installation considerations.
This article provides a detailed analysis of the standard piping sequence for air compressors and dryers, and examines the optimal layout of air receivers, filters, and dryers. It also outlines critical installation considerations, including pipe material selection, bypass…
Blog post
How should compressed air systems be designed in aerospace manufacturing? Requirements for piping, cleanliness, and reliability.
Aerospace manufacturing places extremely stringent demands on the production environment, and the design of compressed air systems directly impacts product quality and operational safety. This paper delves into the core design considerations for compressed air systems in aerospace…
Blog post
How should an air compressor room be designed? Considerations include ventilation, heat dissipation, piping, noise control, and maintenance space.
The design of an air compressor room directly impacts the equipment’s operational efficiency and service life. This article provides a detailed analysis of the four key design elements: addressing ventilation and heat dissipation challenges through scientifically sound supply…
Blog post
How do two air compressors operate in parallel? Piping connections, control logic, and load sharing.
This paper provides a detailed analysis of the key technical considerations for the parallel operation of two air compressors. It covers piping connection standards and check valve configuration, and delves into master–slave control logic and pressure‑band setting strategies.…
An air compressor can readily supply compressed air to multiple cylinders in a circulating manner, though the exact number depends on the equipment’s air delivery rate, operating pressure, and the total air consumption of the cylinders. To ensure…
Blog post
Is it correct to install the refrigerant dryer after the air compressor and before the air receiver tank?
This article examines the proper installation sequence of refrigerant dryers, air compressors, and air receivers. It provides a detailed analysis of the drawbacks of positioning the refrigerant dryer upstream of the air receiver, elucidating how placing the receiver…
In compressed air systems, flow rate is closely linked to pipeline design. Proper selection of pipe diameter, layout, and material directly affects gas delivery efficiency and pressure drop. This paper examines the physical relationships between compressed air flow…
Latest comments