Blog post

The compressed air room is a critical power‑supply area in industrial production, and its proper use and management directly affect equipment life and production safety. This document provides a detailed overview of the daily operating procedures, environmental requirements,…

ISO 8573‑1:2010 primarily addresses compressed air, but its purity class system for total oil content has been widely adopted for the control of industrial gases such as nitrogen. The standard defines oil as the sum of oil vapor,…

Frequent starting of screw compressors is not recommended. It can cause motor overheating, shorten equipment life, and increase inrush current on the power grid. This article provides a detailed analysis of the hazards associated with frequent starts, their…

Prolonged exposure of an air compressor to direct sunlight can cause excessive operating temperatures, accelerating oil degradation and seal aging, which in turn leads to high‑temperature shutdowns, reduced air output, and component failure. This article provides a detailed…

The nitrogen supply pressure in a cleanroom is not a fixed, single value; rather, it is determined through a comprehensive assessment of specific process requirements, the specifications of equipment at each point of use, and pipeline‑system pressure losses.…

This article provides a detailed guide to the proper operation and routine maintenance of electric air compressors in Gansu Province. It covers pre‑start inspections, standardized operating procedures, and post‑shutdown precautions, while offering tailored recommendations that take into account…

This article examines whether there are mandatory regulatory requirements for the temperature in compressor rooms. It analyzes relevant industrial safety and equipment‑operation standards, noting that while there may not be a single, absolute temperature regulation, temperature control in…

Compressor rooms play a critical role in industrial production, yet their operation can generate electrical or mechanical sparks, classifying them as spark‑emitting locations. This paper delves into the safety hazards associated with compressor rooms as spark‑emitting sites, analyzes…