The selection of an air compressor’s rotational speed directly affects its air output, energy consumption, and service life. Rated speeds vary significantly among different types of compressors. This paper provides a detailed analysis of the key parameters that…
Blog post
In industrial production, the parallel operation of multiple air compressors is a common configuration. To prevent high-pressure gas from backflowing into shut-down units—thus avoiding severe failures such as compressor reversal, motor damage, and lubricant leakage—it is essential to…
Blog post
The water level in the storage tank is 20 meters, and the gauge pressure is 1 bar. What pressure is required to inject compressed air?
When injecting compressed air into a storage tank with a gauge pressure of 1 bar and a water level of 20 meters, it is necessary to overcome both the hydrostatic head of the water column—equivalent to 1.96 bar—and…
Blog post
Is it acceptable to use a DN10 316L pipe for GMP cleaning machine compressed air at 0.6 MPa?
In GMP‑compliant cleaning machines, the use of 0.6 MPa‑rated compressed air with DN10 316L stainless steel piping is entirely feasible in terms of both material and pressure rating. The 316L grade meets pharmaceutical‑grade hygiene standards and easily withstands…
Blog post
The relationship between air dryers and air compressors: core synergy in compressed air systems
Refrigerated air dryers and compressors form an indispensable pairing in compressed‑air systems. The compressor supplies the power source, while the refrigerated air dryer, as a critical downstream processing unit, removes moisture from the compressed air. Understanding their relationship…
Blog post
How often, in years, should the oil–gas separator of an air compressor typically be replaced?
The service life of an air compressor oil–gas separator typically ranges from 3,000 to 4,000 hours, with the actual replacement interval influenced by operating conditions, maintenance practices, and oil quality. Regular inspections and timely replacement can effectively reduce…
Equipment operating time is a critical metric for assessing equipment health and developing maintenance plans. This paper provides a detailed overview of common methods for calculating operating time, including approaches based on control system logs, sensor monitoring, and…
This paper examines whether air compressors can be installed directly at the production site. While technically feasible, such an arrangement requires a comprehensive assessment of factors including noise, vibration, heat dissipation, and ambient dust levels. We conduct a…
Latest comments