Prolonged shutdown of an air compressor can lead to issues such as lubricant oxidation, seal aging, condensate buildup, and electrical component moisture. Before restarting, inspect the oil level, filter elements, piping, valves, and instrumentation, and perform necessary drainage,…
Equipment maintenance [ZOB-189432]
Whether an air compressor requires lubrication depends on its design and lubrication method. Conventional piston‑type and oil‑injected screw compressors typically rely on lubricating oil for cooling, sealing, and wear reduction; oil‑free compressors do not use oil in the…
Gumming in air compressors is often associated with oil oxidation, elevated operating temperatures, the ingress of contaminants, and improper oil changes. When addressing this issue, first shut down the compressor and relieve pressure, then identify the location of…
Blog post
Can the cumulative operating time of an air compressor be deleted? Proper interpretation and recommended handling.
The cumulative operating time of an air compressor is typically used for maintenance reminders, equipment management, and condition assessment; whether it can be deleted depends on the controller’s functionality and parameter‑level access permissions. In most cases, this data…
Blog post
How often should an air compressor filter element be replaced? Replacement intervals and how to determine when it’s time.
The replacement interval for air compressor filter elements is not a fixed value; it must be determined based on a comprehensive assessment of the filter type, operating hours, ambient conditions, differential pressure trends, and equipment‑provided alerts. This article…
Blog post
Does it matter that the compressor oil separator and the oil have been in use for four years but with fewer than 4,000 operating hours?
The condition of compressor oil and the oil‑separator element should not be judged solely by operating hours. Even after four years of service but with fewer than 4,000 hours of operation, oxidation, moisture ingress, additive depletion, and filter…
The key to protecting air compressor air hoses lies in proper selection, standardized installation, and regular inspections. By implementing measures to prevent abrasion, excessive pressure, high temperatures, and oil contamination, and by controlling the bending radius, the risks…
Blog post
How often, according to regulatory requirements, must an air compressor be serviced by a maintenance provider?
The maintenance and inspection cycle for air compressors should not be determined solely on the basis of a single source of information. Regulatory requirements typically encompass safe equipment operation, inspections of pressure vessels and safety accessories, as well…
Latest comments